What is Frequency Specific Microcurrent?
FSM is the application of specific frequencies of electrical current to the human body. The current is in millionths of an ampere called micro amps, which is below the threshold of sensation. In other words, the current is so tiny that the person receiving the treatment can’t feel it. Our cells operate and respond to current in the micro amp range. In the beginning, patients often confuse Electrical Muscle Stimulation (EMS) with FSM, as they have had EMS physical therapy at the chiropractor’s office. EMS along with TENS is 1000 times greater current than Frequency Specific Microcurrent.
What is happening to cells during a treatment?
Basically, all matters composed of atomic particles that carry energy and information. The energy and information are contained in the unique vibrational nature of the atoms. So it is said that all matter is in vibration and sustains an electromagnetic field. Another name for this process in our cells is “Biological Resonance”. When a lead crystal glass receives the vibrational energy from a signers note that exactly matches the holding power of the glass crystals atoms, they absorb the energy and information from this frequency and the glass shatters! In like manner, a microcurrent frequency is thought to affect cells in such a way that a dysfunctional frequency stuck within a cell will be neutralized. The cell can then resume its normal functions, one of which is making a most vital energy molecule – ATP. Studies have shown that microcurrent can cause an increase in cellular ATP production up to 500%.
Delivery and Length of a Treatment?
A typical treatment lasts 50 to 60 minutes. The current is applied to the body using moist towels placed on the skin to which the microcurrent wires are attached. In some cases, the doctors will wear specially moistened graphite gloves placed in contact with the skin and direct the current into specific structures such as muscles, tendons and nerves.
Hydration when using Frequency Specific Microcurrent
Ideally a patient should drink 1 litre of water in the hour before treatment and 2 litres in the next 4 hours after treatment. This may vary with children and small adults. Hydration ensures the maximum benefit from the treatment. Taking an antioxidant like Vitamin C or E will help you avoid a detox reaction. Drink filtered water whenever possible.
What can I expect from the treatment?
The best thing about FSM is that the treatment is painless. Two moist warm towels will be positioned above and below the injury site. You will be positioned in a recliner chair or lying down depending on the nature of the injury. In many instances the patient may feel relaxed and sleepy during treatment. For best results the patient should remain as relaxed as possible.
How often should I get Frequency Specific Microcurrent?
As a general rule one may receive treatment once or twice a week. Of course there are exceptions depending on the nature of the problem being addressed.
What can I expect Frequency Specific Microcurrent to accomplish?
Frequency Specific Microcurrent basically decreases pain and reduces inflammation in the tissues of the body. Our cells are like plastic in the sense that they have been bent out of shape by injury or disease. Microcurrent provides an energy that bends them back into proper shape, so to speak. How long the cells stay normal may vary from a few hours to a few days initially. With repeated treatment they are less and less likely to resume their dysfunctional pattern and more likely to remain normal or close to normal. How long this process will take cannot be determined with accuracy at the start. However, as a general rule, if we are dealing with an injury that has occurred within the prior 4 to 24 hours, expedient Frequency Specific Microcurrent treatment may produce rapid normalization and obviate the need for further treatment of the injury.
On the other end of the spectrum are the chronic conditions that have been unresponsive to “waiting it out” or various other therapies which may have produced little or no results. Frequency Specific Microcurrent treatments will have a cumulative effect in 3 to 6 sessions that will either have resolved the problem or started an encouraging trend towards repair and resolution. It must be said that compared to other types of treatment modalities, rapid recovery is the rule and not the exception; and it often makes a difference in a few treatments which is why frequency Specific Microcurrent is such a cost effective choice.
What is Frequency Specific Microcurrent?
FSM is the application of specific frequencies of electrical current to the human body. The current is in millionths of an ampere called micro amps, which is below the threshold of sensation. In other words, the current is so tiny that the person receiving the treatment can’t feel it. Our cells operate and respond to current in the micro amp range. In the beginning, patients often confuse Electrical Muscle Stimulation (EMS) with FSM, as they have had EMS physical therapy at the chiropractor’s office. EMS along with TENS is 1000 times greater current than Frequency Specific Microcurrent.
What is happening to cells during a treatment?
Basically, all matters composed of atomic particles that carry energy and information. The energy and information are contained in the unique vibrational nature of the atoms. So it is said that all matter is in vibration and sustains an electromagnetic field. Another name for this process in our cells is “Biological Resonance”. When a lead crystal glass receives the vibrational energy from a signers note that exactly matches the holding power of the glass crystals atoms, they absorb the energy and information from this frequency and the glass shatters! In like manner, a microcurrent frequency is thought to affect cells in such a way that a dysfunctional frequency stuck within a cell will be neutralized. The cell can then resume its normal functions, one of which is making a most vital energy molecule – ATP. Studies have shown that microcurrent can cause an increase in cellular ATP production up to 500%.
Delivery and Length of a Treatment?
A typical treatment lasts 50 to 60 minutes. The current is applied to the body using moist towels placed on the skin to which the microcurrent wires are attached. In some cases, the doctors will wear specially moistened graphite gloves placed in contact with the skin and direct the current into specific structures such as muscles, tendons and nerves.
Hydration when using Frequency Specific Microcurrent
Ideally a patient should drink 1 litre of water in the hour before treatment and 2 litres in the next 4 hours after treatment. This may vary with children and small adults. Hydration ensures the maximum benefit from the treatment. Taking an antioxidant like Vitamin C or E will help you avoid a detox reaction. Drink filtered water whenever possible.
What can I expect from the treatment?
The best thing about FSM is that the treatment is painless. Two moist warm towels will be positioned above and below the injury site. You will be positioned in a recliner chair or lying down depending on the nature of the injury. In many instances the patient may feel relaxed and sleepy during treatment. For best results the patient should remain as relaxed as possible.
How often should I get Frequency Specific Microcurrent?
As a general rule one may receive treatment once or twice a week. Of course there are exceptions depending on the nature of the problem being addressed.
What can I expect Frequency Specific Microcurrent to accomplish?
Frequency Specific Microcurrent basically decreases pain and reduces inflammation in the tissues of the body. Our cells are like plastic in the sense that they have been bent out of shape by injury or disease. Microcurrent provides an energy that bends them back into proper shape, so to speak. How long the cells stay normal may vary from a few hours to a few days initially. With repeated treatment they are less and less likely to resume their dysfunctional pattern and more likely to remain normal or close to normal. How long this process will take cannot be determined with accuracy at the start. However, as a general rule, if we are dealing with an injury that has occurred within the prior 4 to 24 hours, expedient Frequency Specific Microcurrent treatment may produce rapid normalization and obviate the need for further treatment of the injury.
On the other end of the spectrum are the chronic conditions that have been unresponsive to “waiting it out” or various other therapies which may have produced little or no results. Frequency Specific Microcurrent treatments will have a cumulative effect in 3 to 6 sessions that will either have resolved the problem or started an encouraging trend towards repair and resolution. It must be said that compared to other types of treatment modalities, rapid recovery is the rule and not the exception; and it often makes a difference in a few treatments which is why frequency Specific Microcurrent is such a cost effective choice.
